Edision OS Nino Plus OSCAM Help

Multics config Download & Config Profiles
User avatar
Iznogoud
Active Member
Active Member
Posts: 11
Joined: 27 Dec 2022, 21:22
Has thanked: 3 times
Been thanked: 13 times
Portugal

Edision OS Nino Plus OSCAM Help

#1

Post by Iznogoud »

I have an Edision OS Nino Plus reception box, I need the IPK file compatible with my OSCAM service, but my provider doesn't help me and I don't know if the service is configured correctly.
I have already the files , arm file, oscam.conf ; oscam.server ; oscam.user
Can you give me a help?
User avatar
The Founder
Administration
Administration
Posts: 5218
Joined: 31 Mar 2022, 14:41
Location: sat-forum.net
Has thanked: 9352 times
Been thanked: 1209 times
Contact:
Germany

Re: Edision OS Nino Plus OSCAM Help

#2

Post by The Founder »

Which image used you currently ??
User avatar
Rizwan awan
Active Member
Active Member
Posts: 517
Joined: 01 Apr 2022, 10:02
Has thanked: 38 times
Been thanked: 229 times
Pakistan

Re: Edision OS Nino Plus OSCAM Help

#3

Post by Rizwan awan »

try to install latest Oscam through plugins download , then replace the files which you have
Wetek Play2
Octagon SF8008
Vu+ Solo2
Dreambox 800HD
User avatar
Iznogoud
Active Member
Active Member
Posts: 11
Joined: 27 Dec 2022, 21:22
Has thanked: 3 times
Been thanked: 13 times
Portugal

Re: Edision OS Nino Plus OSCAM Help

#4

Post by Iznogoud »

The Founder wrote: 27 Dec 2022, 21:34 Which image used you currently ??
OpenATV 6.4 for Edision OS nino plus "openatv-6.4-osninoplus-20221118_usb.zip" from http://images.mynonpublic.com/openatv/6 ... osninoplus

And following the steps from

https://www.enigma2.net/image-openatv-6 ... nino-plus/
User avatar
Iznogoud
Active Member
Active Member
Posts: 11
Joined: 27 Dec 2022, 21:22
Has thanked: 3 times
Been thanked: 13 times
Portugal

Re: Edision OS Nino Plus OSCAM Help

#5

Post by Iznogoud »

Rizwan awan wrote: 27 Dec 2022, 22:05 try to install latest Oscam through plugins download , then replace the files which you have
because that's what I've been doing and how it doesn't work and that's why I've been asking for help. :D
User avatar
The Founder
Administration
Administration
Posts: 5218
Joined: 31 Mar 2022, 14:41
Location: sat-forum.net
Has thanked: 9352 times
Been thanked: 1209 times
Contact:
Germany

Re: Edision OS Nino Plus OSCAM Help

#6

Post by The Founder »

Iznogoud wrote: 28 Dec 2022, 00:10
The Founder wrote: 27 Dec 2022, 21:34 Which image used you currently ??
OpenATV 6.4 for Edision OS nino plus "openatv-6.4-osninoplus-20221118_usb.zip" from http://images.mynonpublic.com/openatv/6 ... osninoplus

And following the steps from

https://www.enigma2.net/image-openatv-6 ... nino-plus/

Helo donwload this file put in temp folder via dcc or other ftp apps

How to install
Go to software management and there extension install showing there softcam feed name ipk and press ok and install started after reboot box then go to plugins select softcams all showing here

Code: Select all

https://www.mediafire.com/file/qpdqlr1xugjqm1k/OpenATV_softcam_feed_v9.0-mySATBOX.TV.ipk/file
User avatar
Iznogoud
Active Member
Active Member
Posts: 11
Joined: 27 Dec 2022, 21:22
Has thanked: 3 times
Been thanked: 13 times
Portugal

Re: Edision OS Nino Plus OSCAM Help

#7

Post by Iznogoud »

The Founder wrote: 28 Dec 2022, 08:33
Iznogoud wrote: 28 Dec 2022, 00:10
The Founder wrote: 27 Dec 2022, 21:34 Which image used you currently ??
OpenATV 6.4 for Edision OS nino plus "openatv-6.4-osninoplus-20221118_usb.zip" from http://images.mynonpublic.com/openatv/6 ... osninoplus

And following the steps from

https://www.enigma2.net/image-openatv-6 ... nino-plus/

Helo donwload this file put in temp folder via dcc or other ftp apps

How to install
Go to software management and there extension install showing there softcam feed name ipk and press ok and install started after reboot box then go to plugins select softcams all showing here

Code: Select all

https://www.mediafire.com/file/qpdqlr1xugjqm1k/OpenATV_softcam_feed_v9.0-mySATBOX.TV.ipk/file

Hello again

I did a new installation of all OpenATV 6.4 on my OS Nino Plus box

I installed the IPK file you sent me. It was successfully installed as you can see in the image, Take a look At the images I attached

I Reboot the Box

The OSCAM menu does not appear nor the respective files that could replace the files. Take a look At the images I attached

How can I resolve this?

Thanks again
Attachments
box1.PNG
box1.PNG (369.68 KiB) Viewed 954 times
box2.PNG
box2.PNG (101.63 KiB) Viewed 954 times
box3.PNG
box3.PNG (76.07 KiB) Viewed 954 times
User avatar
The Founder
Administration
Administration
Posts: 5218
Joined: 31 Mar 2022, 14:41
Location: sat-forum.net
Has thanked: 9352 times
Been thanked: 1209 times
Contact:
Germany

Re: Edision OS Nino Plus OSCAM Help

#8

Post by The Founder »

Iznogoud wrote: 29 Dec 2022, 05:02
The Founder wrote: 28 Dec 2022, 08:33
Iznogoud wrote: 28 Dec 2022, 00:10

OpenATV 6.4 for Edision OS nino plus "openatv-6.4-osninoplus-20221118_usb.zip" from http://images.mynonpublic.com/openatv/6 ... osninoplus

And following the steps from

https://www.enigma2.net/image-openatv-6 ... nino-plus/

Helo donwload this file put in temp folder via dcc or other ftp apps

How to install
Go to software management and there extension install showing there softcam feed name ipk and press ok and install started after reboot box then go to plugins select softcams all showing here

Code: Select all

https://www.mediafire.com/file/qpdqlr1xugjqm1k/OpenATV_softcam_feed_v9.0-mySATBOX.TV.ipk/file

Hello again

I did a new installation of all OpenATV 6.4 on my OS Nino Plus box

I installed the IPK file you sent me. It was successfully installed as you can see in the image, Take a look At the images I attached

I Reboot the Box

The OSCAM menu does not appear nor the respective files that could replace the files. Take a look At the images I attached

How can I resolve this?

Thanks again
Its softcam feed done installed
Now you go to menu and see there plugins option press green button for downloading plugins after selecting softcam there show latest oscam emu ncam emu mgcam cccam all softcams press ok and install after go to softcam manager select softcam and putin configuration reboot box
User avatar
admin
Administration
Administration
Posts: 686
Joined: 31 Mar 2022, 11:58
Has thanked: 1434 times
Been thanked: 356 times
Contact:
Germany

Re: Edision OS Nino Plus OSCAM Help

#9

Post by admin »

You have to almost done just follow this

Menu/Plugin
4237408A-343C-4A1D-A531-2FA5802B27F2.jpeg
4237408A-343C-4A1D-A531-2FA5802B27F2.jpeg (59.05 KiB) Viewed 938 times
User avatar
Iznogoud
Active Member
Active Member
Posts: 11
Joined: 27 Dec 2022, 21:22
Has thanked: 3 times
Been thanked: 13 times
Portugal

Re: Edision OS Nino Plus OSCAM Help

#10

Post by Iznogoud »

Thanks for the help so far.

I'm a little lost at this stage, as there are several options and I don't know which one to choose in order to be compatible.
I have already tried one of them, with the following steps.
1 - I downloaded the plugin.
2 - Replaces the arm file and kept the original file name
3 - Replace oscam.conf, oscam.user and oscam.server files
4 - I restarted the box
5 - I was not successful in decoding the channels

How do you think I can move forward?
Attachments
oscam2.PNG
oscam2.PNG (219.58 KiB) Viewed 927 times
oscam3.PNG
oscam3.PNG (369.28 KiB) Viewed 927 times
oscam1.PNG
oscam1.PNG (166.61 KiB) Viewed 927 times
Post Reply
  • Similar Topics
    Replies
    Views
    Last post