Bootloader restore Dreambox Two (red led)

[The Founder]

This problem occurs by passing the wrong file. Or Enigma 2.0, so the device becomes stuck and does not accept normal flashing or even recovery


First: the requirements

cabel flash for dreambox and driver for cable CP210x_VCP_Win_XP_S2K3_Vista_7.zip

IMG_1423.jpeg (24.62 KiB) Viewed 2726 times

Sdcard

IMG_1426.jpeg (20.88 KiB) Viewed 2726 times

balenaEtcher program to burn bootloader file to sd card
*Putty program to pass the bootloader to the receiver

IMG_1427.jpeg (22.17 KiB) Viewed 2726 times

Second: the process
1:Transfer bootloader file to sd card using computer

IMG_1428.jpeg (42.82 KiB) Viewed 2726 times

IMG_1429.jpeg (38.87 KiB) Viewed 2726 times

https://www.mediafire.com/file/9d7lb8to ... r.rar/file

Download the sdcard.bin file and then burn it to the sd card with the balenaEtcher program.
Note if the program does not accept the choice of the memory card placed in the holder
... we will change the holder to another whose shape resembles a flash disk
And we put the memory card on it...... and when the burning is complete, we return it to the first holder to put it in the receiver
2: Download the bootloader for the Dreamtwo device
* Put the sd card in the receiver and turn on the receiver
* We open the Putty program and specify the settings as shown in the picture

IMG_1424.jpeg (81.03 KiB) Viewed 2726 times

serial
com
11520
open
***********
Wait for the Putty program to read the receiver, as in the picture below

IMG_1431.jpeg (38.26 KiB) Viewed 2726 times

the line dreambox_two # enter the two commands in the order, after entering them press
return:
1. fatload mmc 0 ${loadaddr} u-boot.bin (click return)
2. amlmmc write bootloader ${loadaddr} 0 ${filesize} (click return)

IMG_1432.jpeg (41.73 KiB) Viewed 2726 times

Finally, remove the sd card from the reciever
and reboot it and flash it in the normal way in the browser
Download the explanation

thankxx FTABIN

[Bagira]

Very good , information