Bootloader restore Dreambox Two (red led)

Post Reply
User avatar
The Founder
Administration
Administration
Posts: 5221
Joined: 31 Mar 2022, 14:41
Location: sat-forum.net
Has thanked: 9368 times
Been thanked: 1211 times
Contact:
Germany

Bootloader restore Dreambox Two (red led)

#1

Post by The Founder »

This problem occurs by passing the wrong file. Or Enigma 2.0, so the device becomes stuck and does not accept normal flashing or even recovery


First: the requirements

cabel flash for dreambox and driver for cable CP210x_VCP_Win_XP_S2K3_Vista_7.zip
IMG_1423.jpeg
IMG_1423.jpeg (24.62 KiB) Viewed 1522 times
Sdcard
IMG_1426.jpeg
IMG_1426.jpeg (20.88 KiB) Viewed 1522 times
balenaEtcher program to burn bootloader file to sd card
*Putty program to pass the bootloader to the receiver
IMG_1427.jpeg
IMG_1427.jpeg (22.17 KiB) Viewed 1522 times
Second: the process
1:Transfer bootloader file to sd card using computer
IMG_1428.jpeg
IMG_1428.jpeg (42.82 KiB) Viewed 1522 times
IMG_1429.jpeg
IMG_1429.jpeg (38.87 KiB) Viewed 1522 times
https://www.mediafire.com/file/9d7lb8to ... r.rar/file

Download the sdcard.bin file and then burn it to the sd card with the balenaEtcher program.
Note if the program does not accept the choice of the memory card placed in the holder
... we will change the holder to another whose shape resembles a flash disk
And we put the memory card on it...... and when the burning is complete, we return it to the first holder to put it in the receiver
2: Download the bootloader for the Dreamtwo device
* Put the sd card in the receiver and turn on the receiver
* We open the Putty program and specify the settings as shown in the picture
IMG_1424.jpeg
IMG_1424.jpeg (81.03 KiB) Viewed 1522 times
serial
com
11520
open
***********
Wait for the Putty program to read the receiver, as in the picture below
IMG_1431.jpeg
IMG_1431.jpeg (38.26 KiB) Viewed 1522 times
the line dreambox_two # enter the two commands in the order, after entering them press
return:
1. fatload mmc 0 ${loadaddr} u-boot.bin (click return)
2. amlmmc write bootloader ${loadaddr} 0 ${filesize} (click return)

IMG_1432.jpeg
IMG_1432.jpeg (41.73 KiB) Viewed 1522 times
Finally, remove the sd card from the reciever
and reboot it and flash it in the normal way in the browser
Download the explanation

thankxx FTABIN
User avatar
Bagira
Active Member
Active Member
Posts: 43
Joined: 05 Mar 2023, 19:44
Has thanked: 48 times
Been thanked: 20 times
India

Re: Bootloader restore Dreambox Two (red led)

#2

Post by Bagira »

Very good , information
Post Reply
  • Similar Topics
    Replies
    Views
    Last post